Electric ball valve-The Yangzhou Bernard valve automatic control Equip

Product Overview
The ball valve is at home and abroad advanced technology and the development of a new three-way switching type control valve. Standard dual port hole of the L-type three ball core, change the relative angle of the ball core pipeline, different combinations of three pipeline fluid control; T-type channels from the ratio of the role for break fluid, gas, regulation and control of the ratio of steam and other media.
Electric ball valve type HL 3810R type or PSQ rotary rotary electric implementing agencies, AC220V, AC380V or DC24V power supply voltage for the power to accept the input of industrial automation, instrumentation control system (4-20mA or 1-5VDC ) current signal or voltage signal to control operation to achieve regulation, the process medium is the ratio of two to match or two switching control.

Structural characteristics of

A. The ball valve has two and four seal structure, the spool pore structure in the form of L-type and T-control spool rotation angle, change the spool channel and pipe outlet connection status can be achieved on three manifold combination of control. The ball valve flow capacity, to control gases, liquids, steam, more suitable for control of high viscosity, fiber granular fluid. Also applies to the sealing requirements more stringent occasions.
Two. The two-seat sealing ball valve has a compact structure, beautiful appearance, good sealing performance, it can switch to the medium flow in the pipeline. Also make mutually perpendicular two-channel connectivity on or off (such as flow graph A)
3. The four seat sealing ball valve has a beautiful shape, compact and reasonable structure, it can not only switch the flow, but also allows the three channels interconnected, and can turn off any channel, the other two channel connectivity, flexibility and control the pipeline is the confluence or diversion of media (such as the flow of Figure B).
4. T-spool channel allows three orthogonal pipes connected to each other or to switch from the role in the diversion or confluence; L-type channels to connect the two mutually orthogonal pipeline. Another channel cut, starting to change the media flow role.
5 The ball valve product line: If the flow diagram shown in select conditions;

主要零件材料及适用温度、介质

C（WCB）	P（304）	R（316）
主要零件	阀体	WCB	ZG1Cr18Ni9Ti	ZG1Cr18Ni12Mo2Ti
	球体	2Cr13、（304）	1Cr18Ni9Ti	1Cr18Ni12MoTi
	阀杆	2Cr13	1Cr18Ni9Ti	1Cr18Ni12MoTi
	阀座密封	增强聚四氟乙烯、对位聚苯
	填料	聚四氟乙烯、柔性石墨
适用工况	适用介质	蒸汽、水、油品	硝酸碱类腐蚀性介质	醋酸类腐蚀性介质
适用工况	适用温度	聚四氟乙烯≤180℃，对位聚苯≤250℃

应用规范

设计制造标准	法兰尺寸标准	结构长度标准	检验试验标准
GB/T12237-89	JB/T79-94 HG20592	GB12221-89	GB/T13927-89 JB/T9092-99
API6D	ANSI B16.5	ANSI B16.10	JB/T9092-99
JPI7S-48	JIS B2212-2214	JIS B2002	API598

性能规范

主要技术参数和性能指标

公称通径DN（mm）		15	20	25	32	40	50	65	80	100	125	150	200
流量系系数KV		17	33	62	95	146	232	350	439	810	1205	1912
公称压力PN（MPa）		1.6、2.5、4.0、6.4
球芯转角		0-90º
球芯型式		L型或T型
流量特性		快开式或比例调节式
连接形式		法兰式、管螺纹式（G"）
电动执行机构	型号	RC系列、381R系列、PSQ系列、HQ或QB型
	电源电压	AC220V、AC380V、DC24V
	作用形式	开关型/调节型（隔爆型）
比例调节型	信号范围	0～10mA、4～10mA 、1-5VDC
二位切换型	电信号	AC220V、AC380V、DC24V；反馈信号：有源触点信号或无源触信号

内螺纹连接尺寸表：L型

SIZE	d	L	H	D1	B	W1	W2
1/2"	12.7	64	53	97	32.0	22.4	35.0
3/4"	16.0	76	63	126	38.0	22.4	35.0
1"	20.0	87	66	126	43.5	22.4	35.0
1¹/₄"	25.0	96	81	145	48.0	22.4	35.0
1¹/₂"	32.0	114	83	145	57.0	25.4	38.1
2"	38.1	142	96	204	71.0	25.4	38.1

内螺纹连接尺寸表：T型

SIZE	d	L	H	D1	B	F	G	W1	W2
1/2"	12.7	75	59	126	71.0	235	37.5	22.4	35.0
3/4"	16	85	64	126	81.5	390	42.5	22.4	35.0
1"	20	100	80	145	102.0	505	51.5	22.4	35.0
1¹/₄"	25	115	90	145	108.5	510	57.5	25.4	38.0
1¹/₂"	32	125	96	204	121.0	580	63.0	25.4	38.1
2"	38.1	148	106	204	138.5	655	73.0	25.4	38.1